Description
EDMI MK6E Smart Meter
Standards and Compliance
• Class 0.2S and Class 0.5S
• IEC 62052-11, 62053-22 (Class 0.2S and also Class 0.5S), 62053-23 (Class 2)
• EN 50470-1, EN 50470-3
• NMI-M6
Measurement
• 3 phase 3 wire
• 3 phase 4 wire
Voltage
• Nominal voltage: 57V – 240V (phase to neutral)
• Burden: <10VA / phase @ Vn (3 phase), as per IEC 62053-61
Current
• CT range: 1/4A, 1/6A, 5/10A and 5/20A
• Short time over-current: 20 x Imax for 0.5 seconds
• Burden: <0.5VA/phase
Auxiliary Supply Option
• 100 to 240 VAC
Frequency
• 45Hz – 65Hz
Inputs/Outputs Configuration
• Up to 10 I/O total, independent common ground with 4kV isolation
• Active input: 5V
• Passive input voltage: 5V, 12V, 24V, 48V, 110V, 240V
• BOSFET output: 240V, 100mA maximum
• 2 Programmable LED indicators
• Programmable output pulse width: 1ms to 250ms
• Programmable output polarity
• Time synchronised (optional)
Battery
• Backuptype: Optional lithium battery 1200mAh, 3.6V and SuperCap (single/dual)
• Backup time: 2 years without power
• Battery shelf life of 10 plus years at room temperature
Real-time Clock
• Accuracy: 0.5 seconds per day (over full temperature range)
• Mains synchronised or internal crystal (TCXO) time keeping. However Mains synchronised reverts to internal crystal (TCXO) on loss of all phase volts
Data Memory
• Configuration, TOU data and load survey data
– Flash RAM
– Battery backed up RAM
Display
• 16 Characters by 2 lines alphanumeric display
• Programmable units, multipliers and also leading zeros
• Upto 64 user-defined screen displays
• Displays any available meter parameter
Measured Values
• 3 elements, 4 quadrants
• Import/Export/Absolute Wh, varh and VAh
• Phase A, B, C or Total
• W, var, VA
• TrueRMS voltage (3 phase)
• True RMS current (3 phase)
• Power factor, frequency, phasor angles
Power Quality Indication
• Total Harmonic Distortion (THD)
• Unbalance
• Fundamental voltage, current and watt measurement
• Harmonics (up to the 50th)
• Sag/Swell
– 5 Cycle resolution
– Records time/date/phase/duration/ average and worst excursion
– Programmable trigger levels
• Waveform capture (voltage and current only)
Load Survey/Profile
• NEM compliant
• Over 900 kilobytes of flash data storage space.
– 3100 day-channel capacity at 30 minute intervals
– 1875 day capacity at 30 minute intervals/2 channels
– 520 day capacity at 15 minute intervals/3 channels
• Up to 50 channels
• Interval programmable from 1 minute to 1 month
• Multiple independent surveys
• Energy, instantaneous readings, pulsing inputs and also average/min/max readings
Time of Use
• 8 rates plus unified rate
• Upto 12 separate import and export registers
• Up to 200 programmable special days
• Daily, weekly, monthly, yearly and also special days
• 13 or more previous periods
• Block or rolling maximum demand
• Time of maximum demand
• Configurable billing rest button
Extensions for Customer Applications
Mk6E GENIUS plus®meter continues the successful concept of meter. “Extensions” introduced in the original Mk6 Genius® using “EziScript”, complex register manipulations. It can be performed allowing sophisticated meter functions. However New extensions are constantly under development, contact us to find out the latest updates. Some examples of currently available extensions are:
• Send SMS at percentage of maximum demand or equipment failure alarm
• Maximum demand control of loads via pulsing outputs
• Time of use history
Communications
• Up to 3 independently working communication ports:
– Optical port: FLAG (IEC 62056-21) or ANSI Type 2 (ANSI C12.18)
– RS-232 (RTS/CTS and DTR/DCD)
– RS-485 multi-drop (4-wire with RJ45 or screw terminal)
• Option for SCADA card
• Option for internal modem power supply
• PSTN, UDP/IP, GPRS/PPP capable
• Compatible with MV-90TM
• Master/Slave arrangement with up to 31 ‘Slave” meters accessed through one ‘Master’ gateway meter
Protocol
• EDMI command line
• MODBUS
• DNP3 level 2
• IEC 870-5-102
• DL/T 645-2007
• DLMS
Software
• Ezi View Windows® software (optional), can be used for programming and also
reading the meter
• EziView also allows offline configuration of tariff programs and also all meter parameters for later upload to meters
Environmental
• Specified operating range: -25˚C to +60˚C
• Storage range limit: -25˚C to +80˚C
• Relative humidity: Up to 95% non-condensi
There are no reviews yet.